DR20
Features:
Gloss finish
Solid Sitka Spruce top
Solid Rosewood back & sides
Four color herringbone wood top purfling
Rosewood fingerboard and "Tone Shaped" bridge
Rosewood peghead with inlaid Ivoroid logo
Ivoroid body and neck binding
Slim neck with low shoulders for comfortable play
Immaculate construction and attention to detail
DR20E2
Tacoma Tone Bar
Fixed active EQ with piezo film pickup
DR20E4
Fishman Prefix Plus
Active EQ with volume, notch, treble, bass, brilliance, contour and phase controls with a piezo electric film pickup.

The Tacoma Guitars "VS" bracing is a radical advance over traditional acoustic guitar bracing. We haven't "adjusted" a design from the 1930's, we've applied sixty years of learning.

Tacoma Guitars braces are triangular in shape because they have equal strength to a rounded brace with less mass. 

 Lower mass allows the top to vibrate more freely, and increases the guitars response.

Our "Tone Shaped" bridge is wide and flat on the bass side, and narrow and peaked on the treble side. A Luthier's rule of thumb is that low, wide braces are best for bass frequencies, and tall, thin braces are best for treble frequencies. We've applied this thinking to our bridge and it works.

Our solid Maple bridge plate is asymmetrical, and placed diagonally to enhance the dispersion patterns of our bridge design. Our matched bridge and bridge plate configuration balances the bass and treble remarkably, and produces sustain unmatched by any other system.

There are no sharp corners on the front edge of the bridge to concentrate stress on the top. Less stress - Longer life